Operating Structure Of Electric Curtain

- Jun 08, 2019-

From the installation can be divided into built-in and external. The built-in electric curtain can't see the motor. It only has the track from the surface (the principle is similar to that of the electric rail car, the motor runs in the track, there are quite a few on the market, only the "dream" electric curtain has one); the external type As the name suggests, the motor is bare outside (don't worry, it will be hidden in the cloth after hanging the curtain fabric, you can't see it).

According to the different operating mechanism and decorative effect, it can be divided into electric opening and closing curtain series, electric lifting curtain series, electric ceiling curtain (outdoor electric canopy and indoor electric canopy), electric sun visor, electric awning, etc., such as venetian blinds. Roller blinds, Roman blinds, soft curtains, wind curtains, honeycomb curtains, etc.

Formally can be divided into: electric opening and closing curtains, electric roller blinds, electric blinds, outdoor awnings, outdoor blinds, outdoor sun visors, hollow venetian blinds, full or semi-light-shielding guide roller blinds.

The indoor canopy curtain can be divided according to the installation environment and driving method: Jia Lisi ceiling (there are other sayings about fabrics), FTS, FCS, FSS, etc.

Electric opening and closing curtain motor classification The electric opening and closing curtain system includes track system, control system and decorative curtain. The driving method of the track system includes DC motor drive, AC motor drive and electromagnetic drive.

DC motors generally use built-in or external power transformers, which are safe and low-energy, and the motor does not heat up for a long time. It is an international standard. And the driving power is generally large, the curtain that can be loaded can reach 40-100 kg, the noise is relatively small, especially after the load is smaller than the idling sound, and the control circuit is relatively simple, generally the built-in receiver does not need to be separate. External receiver. The AC motor drive mode can directly use the 220V power supply. The control circuit is more complicated. Generally, an external receiver is required, and it is not safe. Although the drive power is large, the motor is prone to heat and affects the service life.